BACKGavita Pro 630e ceramic metal halide SE CMH
Gavita Pro 630e ceramic metal halide SE CMH The Gavita Pro 630e SE is available with the Philips 315W 3000 Kelvin lamps (for flowering) or 4200 Kelvin lamps (for vegetative or supplemental use).
The Gavita Pro 630e CMH Ceramic Metal Halide contains two 315W CMH lamps. We use an intelligent double ballast concept, enabling to switch off one lamp in the fixture. To make sure that both lamps have equal burning hours and to balance light on the crop, we alternate which lamp is switched off every time an autodim event occurs or when you dim down to a low level.
The fixture is equipped with the M 132 SE CMH630 reflector (medium, 132 degrees beam angle, for double CDM 315 fixtures). The medium reflector is designed for CMH only installations and will give you over 90% uniformity on your crop with an optimal horizontal penetration of the crop.
Contact your local Gavita representative or our support page for more information on recommended use and positioning of our CMH fixtures in stand alone and supplemental applications.
Features & Benefits
Suitable for Gavita Master Controllers
Our CMH ballasts ballasts can be remote controlled by our Gavita Master Controllers. CMH lamps can not be dimmed without deterioration of the light maintenance over time, and restart problems. However, the CMH fixtures are equipped with a Repeater Bus connection so they can be integrated in a HPS solution and use the Master controller timing control and safety features.
Repeater bus interface
Developed specifically for fixed installation with brackets on Unistrut (C profile) systems, the Repeater Bus cabling system allows you to daisy-chain the fixtures in your installation. A Repeater Bus interconnect cable is included with every fixture. You can connect 5 strings of 100 fixtures per Master controller port. This enables you to control up to 1000 fixtures on one EL2 controller.
Available with 930 Agro or 942 lamp
We recommend the 4200° Kelvin CDM Elite 942 for supplemental light and vegetative cycles. The 3000°Kelvin CDM Elite Agro 930 Agro is most suitable for generative cycles and stand-alone use. The CDM Elite Agro has added red light in the spectrum for extra efficiency.
Complete fixture
The integration of ballast and reflector results in a compact fixture. No external lamp wires results in low EMI, which makes the fixture compliant to FCC regulations. All CMH fixtures are FCC tested and compliant.
2.5 Amps 660 Watt Philips CDM Elite 315W 930 Agro or 942 M 132 SE CMH 630 PGZX18