BudBox V2 - 1m x 1m x 2m - Grow Tent Silver

BudBox make some of the best grow-tents available and they’re great value for money. Now in Version 2 (V2) they have got even better! Now incorporating thicker lightproof black trim, thinner yet stronger stitching, double cuffed vents and removeable side vents with a finer mesh, the BudBox V2 Large Tall Silver Grow Tent is now a top quality tent which is ideal for propagation, drying, veg-stage or a flowering setup.
•BudBox - Top Grow Tent manufacturer
•V2 - Thicker trim, better stitching, double cuffed vents and finer mesh insect screens
•Helps you to create an ideal grow environment
•Ideal for use with a 400 watt light
•Tough and fire retardant multi-layer fabric
•Military grade zippers with light-proofing cover flaps used inside and out
•Features ventilation panels with bug-screens and velcro attached covers
•Hanging rails for hanging fan, filter and light/reflector
•Incorporates duct and cable entry points with drawstring fasteners
•Removable water-proof fabric drip-tray bottom insert

BudBox V2 - 1m x 1m x 2m - Grow Tent Silver Contains:

16 x pole sections, 8 x corner-pieces, 3 x hanging rails, 1 x Silver-lined fabric tent, 1 x Carry-bag.

How the BudBox V2 - 1m x 1m x 2m - Grow Tent Silver Works:

A downloadable construction guide can be found in the "Attachments" tab located above this description.

The BudBox V2 - Large Tall Silver - 100 x 100 x 200cm Grow Tent provides a quick and easy way to make an enclosed environment with all the necessary features and facilities for you to create an indoor garden. The frame is made of strong metal poles and the corner pieces are made of a highly robust plastic. The tent itself is made of thick, multi-layered lightproof fabric which is Silver-lined internally for reflectivity. The stitching is top quality and the zippers are military grade and double light-proofed with internal and external zip covers. This means that during the light-off periods it is perfectly dark inside the tent while during the light-on periods there are no light-leaks to the outside and almost all the lamp’s energy is reflected back towards your plants.

Each side of the Bud Box V2 Large Tall Silver Grow Tent has a ventilation panel with a bug-screen and a velcro-attached cover. The rear of the tent has an upper and a lower 100mm cable entry point and a 200mm ducting entry point. The top of the tent features yet another 200mm ducting access point. All the access points feature a draw-string fastener for light-proofing. The Bud Box V2 Large Tall Grow Tent comes with 3 user-positional top hanging bars for hanging lights, filters and fans from. A removable water-proof fabric tray lines the bottom of the tent to catch spills or leaks. A convenient carry-bag is supplied for storing or transporting your tent.

Using the BudBox V2 - 1m x 1m x 2m - Grow Tent Silver

It is usually wise to erect the BudBox tent in the room in which it is going to be used as it is often difficult to fit through doorways. Unpack the tent and connect four of the horizontal bars into 4 of the corner-pieces to make a square. Insert a vertical upright pole into each of the 4 bottom corners and then slot another vertical pole into each of the first 4 vertical poles. Place a corner-piece onto the top of each of them. Connect the top corner pieces together with the last 4 horizontal poles. Place the hanging bars onto the top part of the frame in approximately the correct location for items which will require hanging.

Lay the fabric tent out on the floor and place the frame onto the base section. Wrap the rear and top of the tent over the rear and top of the frame and pull it over so that it fits snugly. The zippers on the sides of the tent can now be zipped along to join them to the top and bottom sections of the tent. The door-flaps can now be held back along the sides by attaching the velcro tabs on the top corners of the doors to the velcro tabs located along the top of the sides. Place the fabric drip-tray in the bottom of the tent and wrap the velcro tabs around the pole at each corner to secure it in place. Your tent is now erected.

Hang your filter and/or duct-fan from the hanging rails and feed ducting out through the most convenient upper ducting entry point. Inlet ducting can be fed in through the most convenient lower ducting point. Fit your reflector and lamp from the hanging rails so that it hangs approximately in the centre of the tent. Easy-rolls are ideal for this. Feed your power cables out through the most convenient 100mm cable entry point at the rear of the tent. On each of the entry points pull the drawstrings tight around any ducting and cables and pull the drawstrings tight on any unused entry points to help keep the tent light-tight. The BudBox V2 Large Tall Silver 100 x 100 x 200cm Grow Tent is now ready for use.

BudBox V2 - 1m x 1m x 2m - Grow Tent Silver dimensions: 1000mm long x 1000mm wide x 2000mm high.

BudBox V2 - 1m x 1m x 2m - Grow Tent Silver ducting points: 1 x 200mm on the top, 1 x 200mm on the rear, 2 x 100mm on the rear, 1 x 150mm on left side, 1 x 150mm on right side.